This very practical Alt-Az mount is made in Switzerland by AOK for William Optics.
It is entirely aluminum made, with a stylish sanded finish and laser engraving. The knobs are stainless steel. We named it EAZY-Touch because it's easy to set-up, and it is easy to use. Tracking stars even at high-power has never been easier. The extremely high quality allows for smooth movements without the need for any slow-motion controls. This very solid Alt-Az Mount is fitted with a Vixen bar clamp on one side and can mount Losmandy-style plates on the other, allowing you to mount to telescopes at one time. Mounting two telescopes should allow you to balance each other more easily too. Two scopes, twice the fun: invite your family to observe with you, or use a larger and a smaller scopes at the same time parallel-mounted.

The head weighs 3.5 kg and mounted on a quality tripod will offer all the stability you need without compromising its portability and ease of use. The "Teflon inside" guarantees that there is no backlash and that your mount will peform oustandingly.

Wooden Tripod

The mount can be purchased "head only", or complete with Tripod. This stable wooden tripod comes with an eyepiece tray. The tripod configuration includes the mounting base with standard 5/8-11 camera tripod connection.
It is ideal for our EAZY Touch ALT-AZ mount, unless you already own a very stable yet portable good-quality camera tripod, such as Manfrotto or Gitzo. Berlebach are strongly recommended too.

How much can I mount on it, how big a telescope?
Provided that you are using a GOOD quality tripod, you can mount up to 10 kg on either side without any need for a counterweight. That means that a 4"-5" refractor for example, is easily handled. For larger or heavier scopes, we recommend the installation of counterweights with a counterweight bar and standard counterweights.
The head has a standard camera-tripod thread to fit on most tripods, but we strongly recommend our wooden tripod in the complete mount configuration which offers the best quality/price ratio.

If you unscrew the bottom silver pillar from the black ring connection, you will find it has a 3/8 for usage on stable photographic tripods. The silver pillar base is threaded M10; this will work with most camera-tripods (metric threaded) and for Vixen GP (SuperPolaris and Vixen type clones, Meade LXD75 etc.) compatible tripods; however to get the best possible "bang for the buck", we strongly recommend our wooden tripod (available separately too) .

We now sell a Vixen-style dovetail plate for usage with the Vixen clamp of the EAZY-T or with other compatible mounts.

這款優良、新式且裝拆快速的 50 mm尋星鏡鏡架，使用簡單方便，並已獲得玩家高度的評價。這是一款相當完美的望遠鏡配件：您再也不必每晚浪費時間在裝拆尋星鏡及鏡架！

裝拆快速方便

• 裝拆皆快速方便的機械結構。

鐵弗龍材質

• 兩個支撐架上各有三支尖端材質為鐵弗龍的微調螺絲。

優雅的外型設計

• 全部採CNC高精密加工處理，任一元件皆採高品質鋁材製成。

景德光學尋星鏡完美的組合

• 定位環可用內徑為55mm，非常適合搭配景德光學的7x50正像尋星鏡(內建暗視野照明)，或是其他廠牌的尋星鏡。

These 90 mm, felt-lined mounting rings are made out of solid aluminum, anodized in black or silver, and will fit most 90 mm OD tubes, and all William Optics 80 and 90mm telescopes (Megrez 80 and 90, ZenithStar 80).
A worthwhile investment if you want the best out of your GEM or Alt-az mount.

Perfect for Megrez

• Supplied with five threaded holes (external imperial threading 1/4x20; internal M6 metric threading) for mounting on most dovetail plates and WO dovetail plate.
• Equally holed on top to fit additional accessories.

Felt-Lined

• Felt-lined to protect even the most delicate telescope finish.
• Very elegant, anodized black version ideal for ZenithStar scopes including the new ZS80IIED.

Big Knob

• Nice, comfortable knobs with teflon paint protection on locking end.

Sturdy

• 2 exagonal metric M6 mounting screws provided.
• These solid rings will keep your telescope always in perfect alignment. A telescope is only as performing as the mount and rings it comes with: saving on rings is not always a wise choice!

These 115 mm, felt-lined mounting rings are made out of solid aluminum, powder painted, and will fit most 115 mm OD tubes, including l William Optics' FLT110, Takahashi FS-102 (Od 115mm). A worthwhile investment if you want the best out of your mount and telescope.

PERFECT FOR FLT110

• Supplied with five 1/4x20 thread holes for mounting on most dovetail plates and WO dovetail plate/combo plate.
• Four holes on top to fit additional accessories.

FELT-LINED

• Felt-lined to protect even the most delicate telescope finish.

BIG KNOB

• Nice comfortable knobs with teflon paint protection on locking end.

STURDY

• Just 820 g per pair.

These beautiful 100 mm guide rings are made out of solid aluminum, anodized in black, and will fit virtually every 60 to 90 mm O.D. tube to be used as guiding scope. You can use these rings for most 80mm telescopes like our Megrez or ZenithStar and for our ZS66 series!

Nylon Tip
Three point alignment screws come with nylon tips to avoid scracthes to your OTA.
Easy to align.

Beautiful
Fully polished, will not disfigure on your beatufil refractors!
Easy to mount on WO mounting rings.

Large Screws
Nice, comfortable knobs with teflon paint protection on locking end. Ideal for piggy-backing on SCTs or on larger refractors.
Perfect for our Vixen-style dovetail plate or Losandy-style Combo Plate for use on GEM or Alt-Az Mounts such as the WO Eazy Touch.

Sturdy
These solid rings will keep your telescope always in perfect alignment. A telescope is only as performing as the mount and rings it comes with: saving on rings is not always a wise choice!

William Optics' new Dovetail Plate expands your options: you can now choose a fully-anodized, WO product to mount your telescopes on Vixen-style mounts.

Perfect for Eazy Touch
This new Vixen-style dovetail plate has been designed to fit our EAZY-Touch Alt-Az mount perfectly.

Fully Anodized
Fully anodized to last longer and look better.
Large enough to accomodate mounting or guiding rings safely.

Compatibility
Fits Vixen mounts (Great Polaris, Sphinx) and Synta mounts (EQ-series), and other compatible mounts, such as William Optics EAZY-Touch Alt-Az Mount, Meade LXD-55 and LXD-75 mounts, Celestron CG-5 or Advanced Series go-to mounts.
Precision-machined out of solid aluminum, black anodized for great looks and life-long durability.

Light
Light but sturdy, mount any scope on it easily!

A mount is only half of the equation. Actually less than half. The best telescope and the best mount, still need a versatile mounting plate to go with. William Optics Combo plate (dovetail and saddle plate) is elegant, solid, and machined to the highest standards, as any WO product.

Top Quality

• William Optics uses only high-grade aluminum. This guarantees your Combo plate to last a life-time.
• Precision-machined for perfect and smooth fit.
• Black anodized to enhance good looks and durability.

Versatile

• This Losmandy-style dovetail and saddle plates will mount on various German Equatorial Mounts (GEM).

Any Rings OK

• Virtually any rings, like the WO 90mm rings, or the WO 115mm rings, or any other brands' mounting rings, will easily fit in one of the holes provided.
• The COMBO design allows for quick and easy release from the saddle plate of the tube assembly. The large knurled knob holds the dovetail plate steady in place.

Perfect for the astrophotography refractors

• This combo plate goes perfectly well with telescopes you want to do astrophotography with. In case of rain or for a quick release, the dovetail will easily slide out of the saddle plate. When only the best will do, this combo is what you want.

FLT-110專用像場修正鏡採CNC高精密加工處理，是針對FLT-110 APO高級望遠鏡所設計，如果您對天文攝影的要求很高，這款像場修正鏡是一定要的啦!

APO全消色差鏡片

• 三片式光學設計，絕對不會讓您的FLT望遠鏡的成像品質變差。

相機轉接器

• 轉接器適用規格：6x7大底片單眼相機／35mm單眼相機。

35mm單眼相機

• FLT-110 APO 像場修正鏡能搭配35mm單眼相機使用。

這款極致優雅的2吋APO全消色差減焦／像場修正兩用鏡，內建CCD相機轉接器，同時也適合搭配焦比為6至10的折射式望遠鏡來使用。此外，其所具備的 0.8倍減焦功能可縮減焦距長度，提供您更便利的天文攝影使用，而像場修正鏡則可以幫助您拍攝到更銳利及精確的影像。特別值得我們推薦的是其所具備的 CCD相機轉接器功能，非常適合搭配CCD相機拍攝使用。

APO全消色差鏡片

• 完全多層鍍膜高品質三片式光學設計鏡片。
• 0.8倍減焦。
• 內含與T-RING單眼相機用接環相同的標準螺牙，可轉接任何廠牌的35mm單眼相機。

最先進的電鍍處理技術

• 最先進的電鍍處理技術。
• 透鏡邊緣及鏡身內部完全漆黑，內有螺牙可轉接轉接器。
• 適用大部分焦比為f6 到f9，對焦座為2吋的折射式望遠鏡。

內建CCD相機轉接器

• 兩支內建螺牙可安全地固定任何規格的CCD相機。
• 內含轉接保護銅片。
• 內建CCD相機轉接器。
• 可搭配2”或1.25”的目鏡(需透過適當的轉接器) ，以減少焦距並達到像場修正的效果。

合理的價格

• 價格合理，輕鬆就可以開始享受以CCD相機進行天文攝影的樂趣囉！
• 與同級品牌相較，價格只有他牌的30%。

景德光學出品的延焦鏡，是您做高倍率觀測及攝影的最佳選擇。 這款三片式光學設計的延焦鏡，搭配具有APO全消色差功能的折射式望遠鏡搭配，保證不會增加任何的色差。同時，其製作精良的吻合度與拋光處理，若與景德光學的其他產品搭配，都會是非常完美的組合。 我們在此鄭重的推薦這款2.5吋APO全消色差2.5倍的延焦鏡，加入這款延焦鏡，為您目鏡組的收集，畫下一個完美的句點。

三片式設計

• 全消色差APO三片式光學設計，呈現完美的色彩校正能力。
• 理想的2.5倍放大倍率，適合搭配大多數的目鏡及折射式望遠鏡使用。
• 所有鏡面表面均經完全多層鍍膜處理，呈現出絕佳的成像對比度及明亮度。

完美的機械加工特性

• 採CNC高精密加工處理，自單一優質鋁材製作而成，絕非散材組裝而成。

製作精良的吻合度

• 平滑順暢的表層電鍍，與精緻的拋光處理。

影像不閃動、無疊影

• 透鏡邊緣及鏡身內部完全漆黑，影像不閃動、無疊影。
• 內有螺牙可轉接2”濾鏡。

這款2吋SCT望遠鏡專用Crayford式對焦座，可說是要求嚴格的天文愛好者必備的配件！這是一款具有可旋轉360度角的Crayford式對焦座，也是景德光學自傲的產品之一。 秉持著終其一生的設計理念，實際針對各式標準規格的SCT／MC望遠鏡，量身訂做的Crayford式對焦座。保證您在進行高難度的觀測或攝影時，絕對可以盡情的享受「影像零位移」(zero image-shift)。 無論是在品質上或是價格上都是無懈可擊的產品。

使用順手便利

• Crayford式設計：「影像零位移」(zero image-shift)，對焦更是輕鬆方便！
• 使用超順手，不晃動也不傾斜。
• 大且有凸邊設計的「指旋螺釘」，即使您戴著手套，也可以輕易調整鬆緊。

具高度的調節性

• 對焦筒可自由調整鬆緊度，以方便搭配各種週邊備件（需要使用六角螺絲板手）。
• 結構堅固緊實，配合適當的調整，可達到５公斤的最大載重量。
• 對焦筒配有可鎖定的螺絲。

適用任何規格的SCT望遠鏡

• 可360度旋轉，附可鎖定的旋鈕。
• 內建轉接環可適用各種規格的SCT／MC望遠鏡。
• 對焦筒最大伸長量為4.5 cm（1.8 inch）。

構造精緻優美

• 高品質的拋光處理。
• 採CNC高精密加工處理，自單一優質鋁材製作而成，絕非散材組裝而成。
• 附「2吋轉1.25吋轉接環」，內含轉接保護銅片。
• 內部有防反射螺紋設計(對焦筒與轉接環都有)，能有效提高影像的對比。

這款使用順手便利的2吋Crayford式對焦座適用於Synta製造 (如：Skywatcher，Celestron，Orion 及其他品廠)的折射望遠鏡。 它將使您的觀測的功能性與型態大大地增加，而且保證「影像零位移」(zero image-shift)，星點測試(star testing)更佳。 不論你的折射望遠鏡是哪種尺寸，這對焦座都是您備配升級的最佳考量！

精確的對焦系統

• 2”Crayford式對焦座：操作順暢，對焦精確，「影像零位移」(zero image-shift)。
• 堅固如岩石，平順如羽毛。
• 「2吋對焦筒旋座」及「2吋轉1.25吋轉接環」均內含轉接保護銅片。
• 大型鋁製固定旋鈕。

製作精良的吻合度與拋光處理

• 可360度旋轉，附創新的鎖定系統。
• 對焦筒附鎖定螺絲及可調整鬆緊度的旋鈕，以方便搭配各種週邊備件，如CCD相機、大型目鏡、及「雙眼轉接鏡」(binoviewer)等。
• 全部採CNC高精密加工處理、表面高級電鍍、材質則為堅固的鋁。
• 「對焦筒最大伸長量」特長(75 mm)。

無懈可擊的便利性

• 尋星鏡架拆卸方便快速，兩個支撐架上各有三支尖端材質為鐵弗龍的微調螺絲，不另加價喔!

架設輕鬆簡便

• 您需要做的，只是最簡單的組裝。
• 更換掉你隨鏡附送的壓鑄齒輪齒條型裝備，從來不會像這款產品這麼簡單:只需鬆掉三根螺絲，三分鐘內您就做好準備，可以開始觀測了！ 這款產品適用於任何3”∼6”的鏡筒！！

Today you can enjoy the benefits of BaK4 quality binoviewers in your refractor, SCT or Newtonian scope with a convenient PACKAGE including:

• 1.25” Binoviewer with anti-marring compression rings
• 2x William Optics 20 mm WA 66 deg. eyepieces included (available optionally too)
• Barlow nosepiece (1.6x) for easier focusing with most telescopes! It can be mounted on other eyepieces too!
• Exclusive gift box.

Or go for the ROCK-BOTTOM price of the OTA version, if you already own a set of eyepieces!

The price is very inviting, but the experience of tridimensional two-eye viewing is even better!

WO Fit & Finish

• White powder painting.
• Large chromed thumbscrews and anodized aluminum.
• A very useful optional 2x Barlow/Corrector and extender are available separately for telescopes with special back-focus issues.

BAK4 Prisms

• Only high-quality BaK4 prisms with 20mm clear aperture for maximum brightness and contrast with any telescope.
• Fully Multi Coated.
• Anti-marring brass ompression rings for your eyepieces.
• Individual eyepiece focus adjustment.

Choose the Best! Best price!

• The best quality-prism 1.25" Binoviewers package out there!
• Sets of 2 eyepieces for binoviewing available at discount prices.

Please note: double check with us if you want to know if you can easily reach focus with any specific William Optics telescope. We cannot guarantee you will reach focus without an optical corrector/barlow with other brands' scopes; we can only report what other users told us about specific combinations.

This very practical Red Dot Finder (R.D.F.) comes with a handy, quick -release bracket included in the price. It fits perfectly on ZenithStar telescopes.
Centering your objects in the sky has never been easier!
Look through the finder with one eye leaving the other open, and you will see one of the four selected LED shapes in the sky.

Quality Make

• Optimized anti-reflection coating.
• Alt-azimuth adjustment controls.
• Very compact size, but no plasticky feel.

Quick Release

• Seven different brightness adjustments make it suitable for any lighting condition, including daylight.
• Quick-release bracket/base included in the price. Available separately. The new base can be mounted M5 and M6 screws and has a longer bracket for easier positining.

Multiple Reticles

• Four different reticles to select from, dot, crosshair, circled dot, circled dot with crosshairs.

Ideal for Any Scope

• Will mount on any scope with a M5 threaded bracket hole.
• Especially suited to ZS66 and ZS80.
• 3V lithium battery included.

這是一款獨特、高品質的內建暗視野照明正像尋星鏡，若與「Megrez家族」或「ZenithStar家族」折射式望遠鏡搭配，將會是最完美的觀測組合。

5.2度超廣角視野及內建暗視野照明紅十字標線，對於觀測模糊黯淡的天體，有相當大的幫助。

同時，它也非常適合用於大型的史密特-蓋賽格林式望遠鏡，或是任何一款景德光學出品的折射式望遠鏡。

使用便利

• 清澄的正像視野。
• 50 mm的高品質物鏡。
• 高達5.2度的超廣角視野。

精緻的銜接與表面磨光處理

• 可調式焦距。
• 表面磨光處理。

眼罩

• 橡膠材質眼罩。
• 「眼視目鏡距離」特長。

內建暗視野照明

內建精密垂直的暗視野照明紅十字標線。

這是一款獨特、高品質的內建暗視野照明正像尋星鏡，若與「Megrez家族」或「ZenithStar家族」折射式望遠鏡搭配，將會是最完美的觀測組合。

6度超廣角視野及內建暗視野照明紅十字標線，對於觀測模糊黯淡的天體，有相當大的幫助。

使用便利

• 清澄的正像視野。
• 30 mm的高品質物鏡。
• 高達6度的超廣角視野。

精緻的銜接與表面磨光處理

• 可調式焦距。
• 表面磨光處理。

眼罩

• 橡膠材質眼罩。
• 「眼視目鏡距離」特長。

內建暗視野照明

• 內建精密垂直的暗視野照明紅十字標線。

Expand the accesory capabilities of your ZenithStar 66 with this practical and inexpensive SCT adapter/extender!
Will fit any telescope that has an SCT 2" back: if you have a 2" standard diagonal for your refractor, you won't need a new one for your SCT!

SCT Adapter

• Allows connection of 2" accessories such as photo adapters or 1.25" diagonals to ZS 66 and other 2" SCT-threaded telescopes.
• Completely anodized.
• Anti-marring brass compression ring chromed thumbscrew.

Beautiful Finish

• Black anodization.
• Internally matte blackened for no light reflection.
• Makes it easier to connect 2" accessories to your scope.

High Quality

• Your 1.25" diagonal doesn't reach focus on the standard SCT back because of lack of out-focus? Using this extender it will!

Convenient

• Internally matte blackened for no light reflection.
• Easy to use on your ZenithStar 66. Will also fit other brands' SCT telescopes which have a 2" back with standard SCT thread.
• Inexpensive solution to add 2" capabilities to your scopes!

William Optics 2" extender tube.

CLAMP RING

• Brass clamp ring will protect your precious EPs.
• Chromed soft screw.

WO QUALITY

• In bundle with Megrez ED telescopes.
• Useful for any telescope that needs additional focus length.

FIT AND FINISH

• Machined out of solid aluminum.
• Black anodized finish.

BLACKENED

• Internally blackened and threaded

The ideal 2" camera adapter for prime focus photography.

T-RING

• Standard T-Ring connection. (T-ring to fit your camera not included)

BAUTIFUL FINISH

• Black anodization.

HIQH QUALITY

• Aluminum body, completely machined.

NO STRAY LIGHT

• Internally matte blackened and threaded for no light reflection.
• Threaded for 2" EP/ filters.

William Optics 2"~1.25" Adapter comes with a compression brass ring to prevent marring of your eyepieces and accessories. Comes as standard with most William Optics accessories and telescopes. Weight : 80 g

HIGH-QUALITY MACHINING

• Completely high-grade aluminum and CNC machined.
• Large chromed thumbscrew.

PRECISELY MADE

• Polished anodizing on all surfaces.

COMPRESSION RING

• Compression brass ring to prevent marring of your accessories.

INTERNALLY BLACKENED

• Internally blackened and threaded

若想將您的數位相機固定在望遠鏡的目鏡上，不論是單筒觀景望遠鏡或是雙筒望遠鏡，我們要向您介紹一個最便宜，最安全以及最快的轉接器。您只要輕鬆地將相機固定在數位相機專用的轉接器上，就可以準備好好地來拍照了！

數位望遠攝影變簡單了

• 透過直徑1／4吋20螺牙的三腳架螺孔，任何廠牌數位相機皆可使用。

可精密對準目標

• 雙溝槽X-Y 設計（左右調整用）。
• 微動調整旋鈕。
• 適用於任何廠牌的數位相機。

優良材質

• 標準三腳架螺孔。
• 高硬度鋁合金材質。
• 總重量只有360公克，長度只有20公分。

若想將您的數位相機固定在望遠鏡的目鏡上，不論是單筒觀景望遠鏡或是雙筒望遠鏡，我們要向您介紹一個最便宜，最安全以及最快的轉接器。您只要輕鬆地將相機固定在數位相機專用的轉接器上，就可以準備好好地來拍照了！

數位望遠攝影變簡單了

• 透過直徑1／4吋20螺牙的三腳架螺孔，任何廠牌數位相機皆可使用。

可精密對準目標

• 雙溝槽X-Y 設計（左右調整用）。
• 微動調整旋鈕。
• 適用於任何廠牌的數位相機。

優良材質

• 標準三腳架螺孔。
• 高硬度鋁合金材質。
• 總重量只有360公克，長度只有20公分。

景德光學出品的VR-1，是1.25吋的紫光減光濾鏡，可以大大地降低許多色差效應（紫色光暈及藍色光芒），使消色差折射鏡能呈現「自然本色」。

這款VR紫光濾鏡特別適用於攝影(彩色及黑白皆是)上。它會吸收紫色光波段(400 nm左右)，而這個波段正是色散現象經常發生的區域，這使得拍攝到的星點幾乎無色差，銳利宛如針尖，展現出全消色差APO該有的品質。

高品質的鏡片材質

• 採用高品質的鏡片材質，可以有效除去紫光現象，以達到幾乎消色差的程度，同時，對於其他波段的光，仍能保有良好的穿透率。

1.25英吋的轉接規格

• 濾鏡上的螺牙可轉接任何1.25"的目鏡及天頂鏡。

製作精良的拋光處理

• 鋁製機身，全程精密機械加工。
• 鏡身上有雷射雕刻的產品規格。

APO全消色差等級影像

• 當觀看較為明亮的物體，例如：月亮，金星，及明亮的星體，可以有效地降低「假色」以達到幾乎APO全消色差等級的影像。